Tuesday, January 31, 2017

Hesston Steam Museum's Stationary Steam Engine Exhibit

(Satellite)

Every Labor Day Weekend a visit to the Hesston Steam Museum is special because they have all of their equipment running. I went the first year I got a digital camera, 2014, and took so many pictures and videos that I haven't been able to figure out how to present them. A partial solution is to start with their display of three stationary steam engines that are run from a single boiler because I need a picture of the 10-foot flywheel for another posting.

I started with taking a video that walks around the exhibit.
(new window)


Then I took some stills of each of the engines.

20140831 0060






This was another genset on the grounds, but it no longer operates









 I took a couple of pictures to catch the movement of the crank and the dot on the flywheel.
 A closeup of the Corliss valve gear so that it would be brighter with less back lighting and because that is the main feature of a Corliss steam engine.










Mississippi Dams and Locks #26, Alton, IL (Melvin Price)

(John Weeks III New; see below for the Satellite; Birds-Eye View, note that they have the main lock bulk headed because they are having to already do repairs to the lift gate. Since the repairs are being done during the shipping season, they are probably emergency repairs. That is, something broke already. It is a good thing they built the second lock!)

I wrote an overview of the old bridges and dam to provide some context, which has some more photos.

1941 Aerail Photo from ILHAP
The old dam has been replaced by a new dam about two miles downstream. So I have to use an old aerial photo to show the original dam. It was opened in 1938, but the longest lock was 600 feet, and it was creating a traffic jam of tows waiting to lock through. So construction began on the replacement Melvin Price Locks and Dam began in 1979 and the main 1200x110 lock was opened in 1989 and the old dam was demolished the next year. The auxiliary 600x110 lock was completed in 1994. The new dam has an enhanced visitor center called the National Great Rivers Museum.

HAER IL-31 has a pictures of the old dam and the two old truss bridges just downstream from it. HAER also has documented the construction of the new dam as IL-32. The railroad bridge has been abandoned and removed while the US-67 bridge has been replaced with a cable stay bridge.

While checking out a roundhouse in Alton, I got a 1945 map. I thought it would be interesting to compare the resolutions of the aerial photos.
EarthExplorer: Aug 2, 1945 @ 27,200; AR1BO0000020068

[WikipediaOld, WikipediaNewJohn Weeks III]

Satellite
You can still see where the west end of the dam terminated. John Weeks III explains that the old dam suffered from holes being scoured in the bedrock. "The structure was also prone of large movements during high water." If water could move the dam, I'm surprised they waited over a half-century before replacing it!
Mike O'Neal posted
Park downtown Alton the train bridge is gone and a new Alton bridge is in place today the train bridge would open and close on the lock and Dan 26 to let the boats go through. The dam 26 is move down the river about a haft mile.
[This is just one of the construction photos from HAER IL-31]

Pete Zimmerman posted
View of the excursion steamer J. S. and the towboat Mississippi in the main lock of Lock & Dam 26, Alton, Madison County, Illinois Upper Mississippi River 9-Foot Channel Project Photograph No. 3544. taken on June 7th, 1938 - From the Library of Congress
 
David Gulden posted
Ernie Pruitt: Looks like the old Lock 26 Alton IL.
Theo Pearson: Ernie Pruitt Yes, tough to get in downriver.

James Vaughn commented on Michael's post
Melvin Price Lock and Dam 1980

Dave Hall ->  RAILROAD HISTORY BUFFS OF ILLINOIS
Dave's comment:
To all the folks in Jersey and Madison counties,,check out this photo of Chautauqua from the bluffs facing east,,notice the river level before the lock and dam in Alton,Illinois


Birds-Eye View
The bluffs don't look as big, and then I realized that was his point. They must have piled a lot of dirt on top of those old railroad tracks to make an embankment for IL-100. I wonder how frequently that road gets flooded.



I include a satellite image of the main structures of the new dam because it caught a 15-barge tow entering the main lock.
Satellite
J Clear caught the 110x42 feet Tainter gates in a raised position so that the river can run freely. It looks like the bottom of the gates have been badly damaged even though this is a relatively new dam. These gates look like a new covered truss design, and it appears the new design has failed. (The "link" in the caption gives you access to higher-resolution copies of this picture.)
By J Clear (talk) - I created this work entirely by myself., CC BY-SA 3.0, Link

HAER reports:
Lock and Dam No. 26R represent the present state of the art in river navigation control works. The basic components of the installation are comparable to those utilized in the 1930s. The most striking difference between the older installations and Lock and Dam No. 26R is the immense size of the new structures. The significance of the new installation is not limited to its size. Throughout the design and construction process, the Corps of Engineers and the various contractors have engaged in an extensive program of computer-assisted design, testing, and evaluation. These sophisticated studies represent perhaps the most significant difference between the older structures and Lock and Dam No. 26(R). 
The condition of those gates indicates designing with "engineer's gut feeling" is better than design by computer.

Satellite
Clark's photo shows seven of the nine gates. The other two are between the two locks. I've never seen that before. This design strikes me as bad. There is the issue of increased construction costs because more guide walls need to be built because the locks don't share a wall. But there is also the operational issue that when those two gates are open, it creates an outdraft for the main lock. You can tell they are worried about an outdraft causing problems because of the two big, round buffers they built upstream of the gates. The HAER report implies that the lock was built on H-piles driven down to bedrock. Maybe the bedrock was significantly higher further from the shore to warrant the cost of extra guide walls. Also, they probably open these two gates only if the river flow is so high that the other 7 gates can't pass it. Maybe by that time the flow level on the river is so high that most shipping is shut down anyhow.

The upstream gate of the 1200' lock is a lift-gate instead of a miter gate. So this joins the list of the the Keokuk (#19) Lock and Lockport Lock as the three dams I know of that use a lift gate instead of a miter gate for the upstream side. I still have not found out why a lift gate would be used.

Henry Gulden posted
Ed Nowalk: Ah that brings back fond nightmares.We got hung in the ice in Peoria Lake seems like the winter of '78.I was on the Prairie Dawn that trip.We had 5 or 6 barges froze in the ice.Spent that 30 days in the lake busting ice.
David Greer: If I’m not mistaken the boat I was working on at the time, the Frank Rader, was in for repairs of some sort at Wood River. They put me on one of the bobtail boats, I don’t recall which one - Capt. Jerry Alexander was my partner - to bust ice between the reach above Alton, down to the lock approach. Miserable work, busting ice. I didn’t have to do it but a couple or three days. That was around time this picture was taken, I think, though I’d have to look through my log book to make sure. It’s worth being old and retired, just to know I’ll never have to work in the ice again.
Jacob Phelps: Been there, in those conditions. We almost got froze in at Oquaka above lock 18. We were there fighting through a gorge for 36 hours. Then again at Mel Price.
Rick Freeman: Back when the lockman use to have them follow each other down the trail and wash the head of the next tow off to avoid ice locking between every boat. [Does that mean the tows ran close to each other in single file? What do they do now?]

Brad Maher posted
Melvin Price Lock and Dam 26

Update: During the 2017 flood, water covered the fixed part of the dam and was on part of the road on the levee on the MO side. On the Illinois side, the Great River Road and railroad by the bluffs were under water. And water was up to the mill.
Screenshot from 5/4/2017 video posted by KMOV
Robert G. Gunn Jr. posted
Railroad bridge into Alton, Il.

Massman Construction Co. posted four photos with the comment:
Massman recently partnered with the
St. Louis District, U.S. Army Corps of Engineers
to support repairs to the auxiliary lock chamber miter gates at the Mel Price Lock and Dam in Alton, IL. The lock is the second furthest downstream along the Mississippi River.
Shown here is Massman’s Manitowoc 4600 Ringer removing and replacing the miter gate leaves. Each weighs approximately 480,000 lbs. Our fleet of company-owned equipment provides unsurpassed value and flexibility to public and private clients, with floating crane capacities up to 600 tons.
Ben Stalvey shared
Nothing like a Manitowoc 4600 Ringer
1

2

3

4

David Gulden posted
My favorite pic of the DECATUR LADY in MEL PRICE

David Webster posted two photos:
Donny Labove: N/B at Mel Price small chamber
1

2

Inland Waters River People Page posted two photos with a worthless description. But some comments indicate this is Mel Price.
1

2

Screenshot, March 31, 2019

Brian McKay: Only other 1200 foot chamber on Upper besides Keokuk


Monday, January 30, 2017

UP/C&EI Trestle over Kaskaskia River in Shelbyville, IL

(Bridge Hunter, no Historic Bridges, Satellite, the shadows show the height of the towers.)

(Update: I have taken my own photos and a video of a train crossing the bridge.)

Edward Wayne Bridges posted
CHICAGO AND EASTERN ILLINOIS SHELBYVILLE ILLINOIS
Steven Johnston commented on the above posting
Big 4 bridge with the C&EI in the background. I remember in the late 80's kids used to go on it to drink and hang out. They said there was big gaps in it you could fall through. I went to the edge of it one time but looked too scary for me to try it. Wish I'd taken pics.
Jacob Hortenstine posted with better resolution

This was a popular photo for postcard publishers.
Kevin A Erb posted
Postcard view. Date unknown. I assume this predates Lake Shelbyville?

C&EIRHS shared
The Big Four (NYC) bridge is in the foreground and the C&EI bridge farther back.

Dan Tracy posted
Southbound Mopac at Shelbyville IL 11-28-84.
Gary Dill Some serious weight here with 6 units!
[I contributed some photos in the comments.]
Dave Durham posted
C&EI Kaskaskia River Bridge at Shelbyville, Illinois, 1914.
Dennis DeBruler https://industrialscenery.blogspot.com/.../upc-trestle...

C&EIRHS posted four photos with the comment:
Our C&EI HS Annual Meeting is this Saturday in Shelbyville, IL, at the Lake Shelbyville Visitors Center. We will be at the center from 10-1, then an afternoon auto tour. We hope you can join us.
We are following all COVID-19 guidelines.
A preview is the C&EI/MP/UP Shelbyville Trestle over the Kaskaskia River. These RPPC are from my collection.
1

2

3

4

Amber Lynne posted three photos with the comment: "Kaskaskia river just south of Shelbyville."
Robert Smith Not abandoned used about every 30 minutes to 1 hour 30 minutes all day everyday.
1

2

3