This is one of two of the high-triangular-truss design by the Indiana Bridge Company of Muncie. Seven Mile Road Bridge is the other.
![]() |
| Street View, Oct 2024 |
![]() |
| 2010 photo by Anthony Dillon via BridgeHunter |
"This bridge is one of only a couple surviving examples of a bridge design built by the Indiana Bridge Company of Muncie, Indiana and marketed as a High Triangular truss. The truss design is unique, not copied by any other known company. It is essentially a pin-connected Polygonal Warren truss. Polygonal Warren truss bridges are otherwise limited to riveted connections among known surviving simple span truss bridges. The design of this bridge is similar, but not exactly the same as the patented Pegram truss bridge type." [HistoricBridges]
![]() |
| Greg McDuffee posted 1902 Peterson Ford 183 ft. high triangular Warren polygonal through tuss over the MississInewa River Delaware County, IN 10~25~2026 Michael McDonough: I hate to get technical, but that bridge is not 183 feet high Greg McDuffee: Michael, it is refered to as a high trianguar truss. It is 183 ft. in length. |
The bottom chord is clearly pin connected, but other joints use rivets. In fact, a rehabilitation project must have replaced some of the rivets with bolts.
![]() |
| 2010 photo by Anthony Dillion via BridgeHunter |
The compression members are rather unique. It appears to be four angle irons with V-lacing on all four sides.
![]() |
| Street View, Oct 2024 |





No comments:
Post a Comment