1913 IC/Bloomington Southern Trestle near Victor, IN

(Bridge Hunter; no Historic Bridges; Satellite)

1979 Photo by Jim Berghoff via Bridge Hunter, Public Domain

Richard Koenig posted three photos with the comment:

Bloomington Southern, Part One

Here are some images of the former Illinois Central branch line between Bloomington, Indiana, and a limestone quarry and mill at a place called Victor. The line was built around 1912.

A branch of a branch line, I only saw a locomotive on this line once, back when I was a teenager. I believe the tracks were pulled up in the late-1980s or so, after the Indiana Rail Road took over IC’s line to Indianapolis (known as the Hi-Dry).

Three images by Richard Koenig; taken March 5th 2021.

Dennis DeBruler

It appears the quarry is still active.

https://www.google.com/.../data=!3m1!1e3!4m5!3m4... 

Richard Koenig

Admin

Yes, use trucks (and have been for over forty years).

1
On the Victor Branch   Image by Richard Koenig   March 5th 2021

2
On the Victor Branch   Image by Richard Koenig   March 5th 2021

3
On the Victor Branch   Image by Richard Koenig   March 5th 2021

Richard Koenig posted three photos with the comment:

Bloomington Southern, Part Two

Continuing my previous post, here is a wonderful old trestle a bit further south on the Bloomington Southern. Again, this is the Illinois Central branch between Bloomington and Victor, Indiana.

According to this source, the bridge was built in 1913 and rebuilt in 1942. It’s been out of service since the late-1980s, but hasn’t fallen down or been burned, which is so often the case with structures like this.

Three images by Richard Koenig; taken March 5th 2021.

Don Wagoner: We were never allowed to take engines out on it. When we took 2 units they would be over at the south switch to Victor siding.
We would bring emptied down. Shove loads out. Cut the empties off in the siding. Then pull the loads.

Dennis DeBruler: https://bridgehunter.com/in/monroe/bh45702/

1
On the branch to Victor   Image by Richard Koenig   March 5th 2021

2
On the branch to Victor   Image by Richard Koenig   March 5th 2021

3
On the branch to Victor   Image by Richard Koenig   March 5th 2021

Wyckoff Drawn Steel Co. in Chicago, IL

(Satellite, "historic address" from wastelands, they experimented with machining uranium rods in 1943)

Anne Fischer commented on a MWRD post
This is the steel company my dad worked for. I grew up in Brighton Park neighborhood. I thought you might find this interesting.

takomabibelot Flickr, License: Creative Commons Attribution (CC BY)

Wyckoff Drawn Steel Company (Chicago, IL & Ambridge, PA)

Wycoff Cold Finished Steels. Wycoff Drawn Steel Company. First National Bank Building, Pittsburgh. 3200 South Kedzie Avenue, Chicago. [1940], p. 2.

 

"Wyckoff began operations in 1920 at Ambridge, Pa., and in two short years found it necessary to double the original manufacturing facilities. Now, twenty years later, this plant comprises more than 10 acres of modern buildings and railroad sidings. Served by the Main Line of the Pennsylvania Railroad--via the Pittsburgh, Fort Wayne, and Chicago Division." -- p. 4.

 

Page size: 95 x 178 mm.

I don't know if this was in the Chicago or Ambridge, PA, plant or both. Normally wires are drawn. It looks like this company pulled plates of steel.

Digitally Zoomed

"Cold finished steel bars (CFSB) are a special steel product made by drawing, turning, grinding and/or  polishing hot-rolled, special quality steel bars to give them increased strength, improved machinability, straightness, a smooth finish and dimensional accuracy. They are used as a raw material for the production of a wide variety of shafts, bushings, pinions, gears, pins, fasteners and a variety of screw machine products used in farm and industrial machinery, automobiles, trucks, and industrial equipment." [THE COLD FINISHED STEEL BAR INSTITUTE]

The company started in 1919 in Ambridge, PA. [newspapers]

I added a red rectangle to highlight where I think the plant was. It is interesting that it was served by the Chicago & Illinois Western Railroad.

1929 Englewood Quadrangle @ 1:24,000

The land around it changed because they filled in the West Fork of the South Branch, but the building remained.

1953 Englewood Quadrangle @ 1:24,000

The 1953 cartographer had missed the additions they added by 1938. In addition to the two north/south buildings we see in Anne's photo, there appear to be some more additions.

1938 Aerial Photo from ILHAP

1961 US-49 Helena Bridge over Mississippi River at Helena, AR

(Bridge Hunter; no Historic Bridges; John A. Weeks III; Satellite)

The Sunshine Bridge looks similar.

The length of the longest span is 840', and the bridge is almost a mile long. "The Helena Bridge was struck by a dragline crane as it was being towed upriver on July 15, 1997, resulting in the bridge being closed. A temporary pedestrian bridge was brought in to cross the damaged area of the bridge. A shuttle service was established to transport people from the marina on the west side of the river to the pedestrian bridge, where the passengers would cross the damaged section on foot using the temporary bridge, and then be picked up by a second shuttle to be transported to the Lady Luck Casino on the east side of the river. This shuttle service ran during the early morning and late afternoon to allow commuters to get to their jobs on the other side of the river. The bridge reopened on August 4, about two weeks earlier than initially predicted." [John Weeks]

C Hanchey Flickr, License: Attribution-NonCommercial (CC BY-NC) 
[Given the grain elevator in the background, I think this was taken on the upriver, Mississippi side.]

 

EncyclopediaOfArkansas, Courtesy of the Arkansas Department of Parks and Tourism

John Weeks
The photo above is the second bridge span from the west end of the structure. The main river navigation channel passes under this span

John Weeks
The photo above is a view of nearly the entire main bridge truss structure. This view is from about 3/4 of a mile downstream. There is enough scrub brush along the riverbank that it is hard to get a clear view from ground level. I ended up standing on top of my car.

ADOT via Bridge Hunter

Ramona Pace comment on Bridge Hunter
Flood of 2011
[Given the road next to the bridge, I believe this was taken on the downriver, Arkansas side.]

Michael Timpson, Dec 2020

Colin Gauthreaux posted, cropped
Helena. Making it slow but sure. Stephen Foster.

Screenshot

US-84+425 1940+1988 Bridges over Mississippi River at Natchez, MS

(Bridge Hunter; Historic Bridges; John A. Weeks III; Alamy Photos; Satellite)

The eastbound/northern/upriver bridge was built in 1940, and the other one was built in 1988.

John Weeks
This photo "is a view looking northwest towards the river crossing from an overpass located just east of the bridges. The two truss spans look very similar from a distance despite being built 50 years apart."

This closeup of the 1940 bridge shows that repairs are made with bolts instead of rivets.

Street View

These are the photos that motivated these notes. Three of the sunset photos that Carla Jenkins posted, "1.28.21 Natchez Mississippi LMR363.4"

a

b

c
[The tow is seven barges long. I'm guessing it is five barges wide.]

Katherine Hutto posted
Another round of "Name That Bridge!" Annndddd Go....
John Spires: Natchez

Clyde Gousset posted
Maybe someone can help me out with this. Crossing the bridge at Natchez I spotted the M/V Twyla Luhr down bound with a barge configuration that I have never seen. The port side had two barges in a row, then two rows of five, and then tow rows of two on the starboard side. Anyone have an reason for this barge configuration? Thanks.
Robert Menard: Probably dropped some at Memphis or some other location. I work at the quarry where we load those barges. Pretty much always leave with 30 then make drops on the way south.
Jashua Cox: Robert Menard the Twyla hasn't taken 30 in a long time. 20 to 25 barge boat that's why they called it the retirement boat for luhr.
Scott Mitch Coulter: Dropped barges at Lake Providence and Omega on the way down to Old River.
Dustin Ochs: Berry Qualls care to enlighten these folks why your tow is so wonky? Lol
Sidney Bentley: We will fill out in Baton Rouge, to drop off in New Orleans.
Kendal Buchan: Luhr does bank construction all up and down the river. Their boat deliver barges where ever the work is going on. He may have drop off barges a little ways above Natchez and the rest of his tow goes on to Old River. Luhr had a fleet at Old River. 
[I can't believe how low in the water the barges are. Obviously, they don't have to worry about keep the draft under 9' on the Lower Mississippi.]

I've selected several photos to catch the variance of the river level. I ordered them from low to high. It seems the normal level is near the top of the solid part of the piers.

John Weeks, date unknown because all of his older photos are copyrighted 2008

Bridge Hunter comment by Jerry L. Murphy, photo taken 11/10/2007

Harald Padeborn, Jun 2018

Photo taken by Ben Tate via Bridge Hunter, Feb 2012, cropped

By Charlie Brenner from Jackson Mississippi, USA - originally posted to Flickr as Old ferry landing, CC BY-SA 2.0, Link

Photo by anonymous via Bridge Hunter, Jun 2013, cropped

Charles Adams posted
This photo David Eames shared shows the true size of the piers on the newer Mississippi River Bridge at Natchez, Mississippi... This was taken in 2012 after the highest river stage in recorded history @ Natchez, was 61.9 feet in 2011... Check out the watermark of that historic event in recent history..

Eddie Roberts commented on Charles' post

Same pillow a few years ago. Down bound towboats quit taking the Natz span. Bad currents get the tow all whacked out really quick then BAM! I didn't like that sound.

There's a couple huge chunks of concrete knocked out of the center east span pillow

[I don't know what a "pillow" is in this context.]
David Greer: While they were building the new bridge during the 80’s we routinely had to run the Natchez span s/b. It’s not difficult to make with a big raft of barges, but you have to know how to do it, and the current is swifter down that side of the river. Part of the reason for that is that a rock reef extends from the Natchez shore out to the centerline of the Natchez span. If the river stage ever again drops to below about 8 feet - the lowest stage I’ve ever seen, in ‘88 - you’ll be able to see it. It kind of nozzles the current down. Also, you can actually hit that reef when the stage drops below 20 feet. You can still run it but you have to stay to the river side of the green lights in that span, and you would need to duck into the span, n/b at the last minute, because there is another rock reef about 1500 feet further down the river. All that rock is why you had Natchez-under-the-hill historically, and why most of it washed away in the late 30’s after Giles Cut-off opened up.
[The state boundary shows were the river flowed before the cut-off was dug.]
Reed Vonder Haar: That bridge was surprisingly treacherous at that stage (61.9). And inexplicably, the Coast Guard required us to run southbound at night!
David Greer: I generally straighten out down that right shore below the foot of the revetment, straight with the shore, my jackstaff generally on that left pier, and slowly come around on the green lights at about the same time the high line tower is on them. That seems to keep me straight with the current. You can come around too soon and get in a right hand draft on that right pier. You can outrun that draft. But if you wait a bit too late to come around and wind up with the current on your starboard side, that’s scary. The two or three times I’ve heard about someone hitting that bridge it was the left pier they hit. Lately, that fleet, Vidalia Dry Dock and Storage, has let that anchor fleet get a little too wide for my taste. Also, some of those Marquette boats have pushed in below the point, above the fleet with their big asses too far out in the river. I don’t like getting too far off that shore. I damn sure don’t want to meet anyone above that bridge on the two whistles.
Generally, I’m just happy to be retired.
[I don't understand most of this, but that is the point. It provides insight into what all the captains have to know to run tows on the river.]

Eddie Roberts commented on Charles' post
[The 60 on the pier would be 60' from the bottom of the bridge deck.]

0:38 video @ 0:13, cropped
Joseph Jackson: River Addyson N/B through vidalia span Natchez bridges. My first favorite of yalls fleet after doing tow work with her in Natchez during harvest many times.

2:02 video @ 0:15

2:58 video @ 1:01

Kenneth Lee Shaver posted six photos taken from a towboat.

Bottle|Thermos|Torpedo|Submarine|Treadwell Cars

Ingot trains were another type of "hot car" train. The invention of continuous casting has made ingots obsolete.

Bottle cars were used in integrated mills to carry the molten iron from the blast furnaces to the steel making furnaces. 

 

TheRustJungle by Paul Grilli
1960

Raymond Boothe posted
Ad for Pollock hot metal (torpedo) cars (Dr. Raymond Boothe collection).

 

David Holoweiko posted
Interesting photo marked as a riveted hot slag transport car made at American Bridge . Does anyone know if American bridge actually made these . I mean it says Treadwell on the car . American bridge would have no use for the car as they had no steel making capability . So did American Bridge make these cars ?
Ronald Marr: Hot metal car....you'd never get slag to pour out!
Patrick Carroll: I would assume it was assembled at AB via a kit from Treadwell. That was a popular way of purchasing rolling stock from the 30’s into the 50’s.
Mike Alexander: Peter Savoy American Bridge sat at the west end of Gary works. We cast ladle linings there for the BOF when North American Refractories had a portion of the facility. Looks like this Treadwell was possibly repaired there.

Aubrey Brooks commented on David's post

One of our Tredwell at BHP Newcastle Australia

A newly arrived Treadwell Hot Metal Ladle, used to transport molten iron from the Blast Furnace to the Steelmaking Plant. Overall length is 54 feet, barrel diameter is 10 feet 6 inches and is lined with 18 inches of firebrick. All up weight 400 long tons. Electric motor driven tilting mechanism.

Jeff Zarenski commented on David's post
[Workers] at USS Great Lakes Works welding a patch on a bottle car.

This thread has interesting info on bottle cars concerning size, insulation and rerailing.

The hot iron car on display in the Sloss Furnaces in Birmingham, AL is so old that the bottle shaped design had not yet been developed. Even then they were using three axle trucks.

20200218 1120

The transition has happened to the bottle shape, but it has "only" six axles.

Bill Parkinson posted
The last remaining Mort's Dock hot iron car sits awaiting it's fate back in the 1990's. It is now on display at the Port Kembla works visitor's centre as it is in this photo. As it is outdoors it carries a fair amount of rainwater these days.

Jake Keasling

we had a style that used 250dc to turn them. Man i hated working on them. Wires always burned up. Cool pic

Corey Willams commented on Bill's post
Thought it looked familiar. My photo taken back in 2015, doing the works tour.

This is the post that motivated me to quit just collecting photos and to go ahead and publish. As blast furnaces grew, so did bottle cars. When I see a photo of a bottle car, I always count the number of axles. 16 axles is the largest I have seen. 350 tons was the biggest made, and they were used at Bethlehem Sparrows Point. [TrainOrders]

Rick Rowlands posted three photos with the comment: "First of the new 350 ton bottle cars coming out of the PECOR plant in New Castle.  Date unknown."

Scott Johnson: I work at the old Inland Steel and we have 4 of these ladles. Had a loaded one go on the ground pretty bad last fall. They had to call out two different crane companies (Hulcher and Crane Masters) to tag team it. Had broken rail and everything. Took them about 10 hours start to finish. Would hate to be the one paying that bill.

Donald Hall: How many of you have spent hours with an Oxygen Lance trying to burn open a bottle that had frozen over ?

Jeff Millikin: I’ve spent many shifts doing that at US Steel Granite City Illinois.

Donald Hall: Standing over it, and Eating all the damn red smoke !

Shawn Shaffer: It's is now Ben Weissman Scrap yard but the rail car sidings are still there. The building this is coming out of was where the can recycling is now. If you go in the office they a copy of the prints for the old furnace hanging on the wall. I don't think pa engineering was part of Mesta. All of Mesta works in New Castle is now owned by EGI.

Eugene Hake: Torn down about 8 years ago they put a shredded scrap yard in now I work there 17 years before they tore it down it’s was right beside EQS

1

2

3

Brian Cameron commented on Rick's post
This 330 T molten metal car was built by "Reichard" and located around the Chicago area mills I believe but don't hold me to that cause I'm not real sure of this photos location.
Jason Schaefer: Brian that car looks like it is sitting just outside the gate at IHE/inland. The right side of the picture I know all to well as that’s where we park our bikes when we ride

Peter Manoth posted
Amazing 450 Tons torpedo.
ata Steel Netherlands.
[I think this one has 16 axles.]

Raymond Boothe posted
PECOR 16-wheel torpedo (hot metal) car (PECOR photo/Dr. Raymond Boothe collection).

Kevin A Heggi posted, cropped
2003 a brand new Reichard sub
[How long is any of that paint going to last?]
Sandra Mundell: LTV commissioned #7 to be made for Indiana Harbor, then filed for bankruptcy and Reichard was stuck with it. Wilbur Ross got it for a song when he bought up the bankrupt properties and created ISG.
Jenn Marie: I see IH3 and IH4 furnaces.
Kevin A Heggi posted, cropped
05-16-2003 New sub car for ISG steel......former YST LTV East Chicago.
Butch Fike: Our shop rolled barrel sections & inlaid them, replaced spouts, rebuilt decks & main centers & repaired & inspected them. But I've never seen a brand new sub ladle.
Robert Borg: Who even builds new bottle cars these days??
James Torgeson: Robert Borg Reichard.
Kenneth Treharn: She's a Beaut. That's probably a hot metal bottle car built by Wm. B. Pollock Co. Youngstown, Ohio.

Oliver Buchmann posted

pig iron

more, if you want: https://www.flickr.com/photos/186596816@N07/

[Germany also uses 16-axle cars.]

Aaron Metzger posted
[Some comments talk about these things exploding.]
Dan Kleinhenz: Ignorant question... Do the cars need to be preheated on days like this to prevent thermal cracking of the cars?
Michael Oswald: Dan Kleinhenz nah they have enough residual to keep em hot as long as they’re getting filled at least once every 24hrs.

Comments on Aaron's post

Bill Parkinson posted two photos with the comment: "A couple of shots of Treadwells at work. No.5 blast furnace AIS Port Kembla."

1

2

Donald Dunn shared a Mike Lindsay post
courtesy of Lynda Button, a photo her father Reg took of a brand new Treadwell Bottle Car in 1956.
[I don't know why they paint them. It soon burns off.]

Frank de Meer posted
1-1-1985

Tom Dean

I’ve heard the guys at Weirton Steel call these thermos bottles?, but what is the real “technical” name ?

Chuck Cummins

Treadwell ladle works for me!

Frank de Meer

Author

Torpedo car is common.

[Weirton, WV Note that the bottle car has 16 axles. I'm trying to remember if that is the biggest I have seen.]

 

Rueda Screenshot
Torpedo tilt at Tabaza steelworks, Arcelor Mittal, Spain

 

Brandon While commented Rueda's post, cropped
I’m sitting my train while the ladles are filling right now.
[I wish I knew which blast furnace this was.]

Bill Parkinson posted
A scene in the Sydney Plant of Commonwealth Engineering where equipment for the Australian steel industry is being manufactured. Date unknown but probably in the 1970's.
[Obviously they are making torpedo cars. And it looks like some slag cars as well.]

bill Parkinson posted
A shot of a U.S. treadwell ladle. 200 Ton hot metal car. temporary air line as no brakes fitted. Cast steel spout welded to ladle. Trunnoins riveted to ladle (obsolete). date of photo unknown.

Scott Neaves posted, cropped
Cleaning the skulls out of a torpedo ladle.

Bill Parkinson posted two photos with the comment: "When loaded metal ladles derail they don't just derail, they tend to imitate gophers & dig themselves into the ground. This gives the rerailing crew a bit more stress as there is a time limit on their task due to the vehicle being full of molten iron. Here are a couple of shots of a Pollock ladle in distress. AIS works Port Kembla."

Christopher Beverly: I've seen empties bury themselves half way up the trucks before! Heavy dudes!

Kevin Hollo: I worked for hulcher out of toledo ohio for 10 year. Picked more than a few bottles up. The smaller torpedoes were not bad, but the big ones sucked! I will have to look thru my pics. Im sure I have a cpl

Bill Price: At Fairless Works, our torpedo cars had 4 trucks. If 1 was loaded and derailed, it was quite a job rerailing it. The car shop would come and use jacks to raise the trucks. Using just oak blocking was futile, it would just get crushed. The 4x4, 2x10, and wedges would get the sap squeezed out of them.

Chris Merry: If they take too long to get them back on the. Us bricklayers get more work!

1

2

Kevin Hollo posted four photos with the comment: "These are a few pics of my trainwrecking days. I think this may be Mittal Burns Harbor, maybe. But anyway the bottle had a wash out. We picked the bottle off the trucks and walked it down to two new sets. We tried to pick the set of trucks, but my 583 with extra slabs on her wanted nothing to do with it. They were in a solid block of iron!"

Kevin Hollo We had 4 part blocks, short poles and extra slabs when we had to pick them bottles. I kinda miss trainwrecking. But now I'm a sparky in a mini mill and love it. [Bottle cars are particularly heavy so they had to specially rig their sidewinders to lift them.]
Jon Ruehle What exactly IS a "washout"?
Kevin Hollo Jon Ruehle the refractory cracks or "washes out" allowing molten steel/iron to get behind it. Then melts through the shell of the vessel. In one of the pics you can see where the iron melted through.

1

2

3
[I presume the "black spot" above the hat in the center is the hole in the car that let the iron drain out.]

4

Phillip Prior -> RAILROAD HISTORY BUFFS OF ILLINOIS
Granite City, 2001

Edward Jarolin ->

Off The Beaten Tack Branchline Railroading

Edward's comment: "Passed by accidentally while walking along the CSX's Pittsburgh main."

Note how short the cars were before they figured out how to use more than two trucks to spread the weight on the rails.

Jason Jordon photo

Jim Johnston posted
1980 #6 STELCO LEW Liquid Iron Car ~ Cut In Two To Salvage The Iron FootballJim Johnston The iron is poured into the top of the car and has about a four hour maximum until it must be emptied. If anything happens the iron will gel and finally it will become solid. The car is purposely cut into two sections and pulled apart. The "football" of iron is removed, and broken up to be re-fired. The car is then re-welded and the interior is fully re-bricked ready to go back into service. BTW, the car weighs in at 400,000 + lbs and the liquid iron at about 400,000 + lbs. One 1,500 HP switching locomotive can easily pull 4 loaded cars.Jim Johnston There's a number of reasons for delays. Some times it could just be as simple as a scheduling snag or something major like these big heavies turning a rail on it's side. Whenever it happened, the crew was not happy with the extra work involved and the yardmaster... Well he was always pissed, anyway... LOL

John Abbott posted
duqu 2 bottle cars

Jeff Mullier They are hot metal cars commonly used for transfering moltern iron from a blast furnace to the steel making plant. Many were build by Treadwell, photo of a preserved Australian Treadwell from BHP's Newcastle Steelworks where it was used between the blast furnaces & the BOS plant. https://www.flickr.com/.../in/album-72157625065821174/

John Abbott posted

Rick Fleischer posted
Hot metal train at Warren, Oh. in May of 1975. Train originated at the Republic Steel's Haselton blast furnaces in Youngstown and taken to Republic's Warren mill. RKF photo.

(new window) A bottle train is at the beginning, then its just boats, trains, and bridges. This is the first bottle train I have seen that doesn't have a gondola between each bottle car. If it is staying in the mill and not going over bridges, then a spacer is not needed to spread out the weight. But I have read that the gondola cars provide the braking power for the train because the hot bottle cars would fry brake linings.

Aubrey Brooks posted
TREDWELL IN THE DIRT BHP NEWCASTLE AUS
200TONNE,
Jim Bruneau How long till that molten stuff solidifies?
Ian Worth Jim Bruneau can stay in there a few days , will be to cold to use but still liquid , after that they start developing "skulls" lump of solidified metal. Covering the hole at the top with "breeze "a sand like stuff was good to keep them hot in this situation.
Dan Olah Some bottle trains operated over common carrier tracks (EL in Youngstown, Oh). They would put spacer cars (usually empty hoppers) between the bottles as well as one behind the engine and in front of the caboose. Saw photos of a bottle car where the molten iron ate through the inside lining and exterior of the car and spilled contents on the tracks, etc. That had to be fun to clean up!
Ian Worth Worked with Treadwells for years as a hot metal shunter have been riding that platform when they have derailed due to track failure a few times . Average about 200 tons empty and average about 400 tons full . Have seen them many years ago burn holes through the side. Now they get checked with thermal imaging to see the condition of the refractory bricks inside so it shouldn't happen any more. About 30 years ago they had no air and a guard would ride the platform all the time ready to apply the handbrake if they came loose. Best part of the job was watching them get poured into a wet flat iron pit if it was scrap or the BOS furnace was down "kaboom".
Thomas K. Barber Ian Worth where did you haul those, buddy? Know quite a bit. Ours were slightly heavier,250/480.,but otherwise the same. We hauled the old ones from the mill to a Fab shop with idler cars for brakes in between. They got all retrofitted for brakes,and all new ones have brakes.

George Merriman commented on a post
Hot metal car for molten steel

Larry Grzywinski posted two photos with the comment:

Interlake/Acme Steel had 19 hot metal ladle cars; they all had a 200 ton net weight. 14 were built by Treadwell and 5 by Pollock. They were all roller bearing equipped inside journal boxes, this to protect the bearings from any molten metal splashes. When loaded to the 770,000 lb. allowable gross weight capacity they were the heaviest cars running on any main lines in the Chicago and south suburb areas.

1

2

The first two photos posted by Scott Marlow.

Kevin Tomasic

Nice series. That’s a small bottle car.

1

2

Kraig Hausenfleck posted three photos with the comment: "First pic was a derailed sub car at indiana harbors west side, second and third were at 7 blast indiana harbor east plant 2. Best part of winter cleaning derailment was ladle cars, worst part of summer was well ladle cars."

Kraig Hausenfleck: Never know how long that jobs gonna take. Been on a few that last less than 6 hours to a few that lasted multiple days.

1
[Notice how grainy the photo is. They obviously used high ISO film to take photos in low light.]

2

3

Tim Pritchett posted three photos with the comment: "Sub car half shell update. Friday 12-24 and today 12-27 work done. All fitted up and tacked in. CC BH Fab Shop."

Mike Chechalk: Is that a 250 - 300 ton ladle?

Tim Pritchett: Mike Chechalk 250 ton. Pollock

[There are some comments about welding details that are way over my head. There are also a couple of videos showing the brick laying inside the car.]

Stephen Cussen: I have so many questions. How does it rotate? Hydraulicly, pneumatically, or electrically? How does brake lines run through the cars to apply brakes? Is the brake pipe attached to the side of the bottle? Thanks in advance.

Rick Rowlands: The older Treadwell cars ran the trainline externally of the bottle from one platform to the other. It kinda just hung out there in space but as long as it was on the side the bottle did not pour from, it was fine. Pollock ran the air line into the end of the trunnion with a swivel fitting, then attached it to the shell to get to the other trunnion. Each end of the car has its own independent brake system.

The bottles are rotated with 250 volt DC mill motors through a rather extensive gear reduction. The controllers were installed in the building where the bottles are rotated. Just plug the car in and go.

1

2

3

Tim Pritchett posted two photos with the comment: "New top half shell on a torpedo car."

Joey Harmon: Looks like burns Harbor subs.

Angela Graham: Joey Harmon yep, anything Tim Pritchett posts is. He used to be a keeper.

1, cropped

2

Jason Rowland commented on Tim's post
Here's one we are building at Reichard Ind. Keep the trunions and the rest brand-new. Maybe we should go boating one day??... REICHARD INDUSTRIES

Tim commented on his post, cropped

(new window)    Weirton WV, 1989     The bottle trains are in the background. Here is one of the views.  Here,  here and here are some slag cars in the background. After chugging up a hill, they show the slag cars being dumped.  A five bottle train  The engine is smoking almost as much as a bottle car.

Note that they do not use idler cars inside the plant.
(source)
Bubba Dubs That bottle car loco is flying!




18 photos of a derailed bottle car spilling iron on a park.

4:12 video of a car being emptied into 2 BOP of Great Lakes Works.

15 builder photos of Pollock hot metal cars

Richard Allison: I know those ladles well. They look like mostly 150 ton and 250 ton and a couple a bit larger. I ran a ladle house and did all the maintenance on them from bricking, gunning and mechanical repairs on knuckles, trucks and tilting gearboxes. Good post.